4 AXLE PAVER FINISHERS ON WHEELS

2 No. Bitelli BB670, 4 Axle Four Wheel Drive Asphalt Paver/Finishers, Years 1999 And 2001, Fitted With Hydraulically Extending Screeds From 2.5 Metre To 4.65 Metres Laying Width and 6 cylinder Deutz Engines Plus Automatic Auger Feed Controls, Road And Working Lights, Fully, Repaired, Serviced, All Ready To Work. Plus New Operators And New Spare Parts Manuals, Both Machines To Be Shotblasted And Resprayed With All New Decals Etc.

1 No. Blaw Knox BK95A, Year 1989, Fitted With Hydraulically Extending Screed From 2.5 Metres To 4.75 Metres, Road And Working Lights, Reversing Bleeper, Rotorlights, Automatic Gas Fired Screed Heating And Temperature Control System, Automatic Auger Feed Controls, Ford 6 Cylinder Engine, Plus New Operators And New Spare Parts Manuals, Fully, Repaired, Serviced, Shotblasted, Resprayed And Ready To Work.

1 No. Blaw Knox BK90, Year 1986, Fitted With Bolt On Screed From 2.5 Metres To 6.5 Metres, Road And Working Lights, Reversing Bleeper, Rotorlights, Ford 6 Cylinder Engine, Plus New Operators And New Spare Parts Manuals, Fully, Repaired, Serviced, Shotblasted, Resprayed And Ready To Work

PRICE: £48000 Ex Works

3 AXLE PAVER FINISHERS ON WHEELS

1 No. Blaw Knox BK181, Year 1997, Fitted With Omniscreed V Hydraulically Extending Screed From 2.5 Metres To 4.75 Metres, Hydraulically Height Adjusting Augers, Road And Working Lights, ATIC Automatic Gas Fired Screed Heating And Temperature Control System, Automatic Auger Feed Controls, Ford 6 Cylinder Turbo Engine, Plus New Operators And New Spare Parts Manuals, Fully, Repaired, Serviced, Shotblasted, Repainted, In Excellent Working Order And Ready To Work.

1 No. Blaw Knox BK165, Year 1993, Fitted With Omni I Hydraulically Extending Screed From 2.5 Metres To 4 Metres, Ford 4 cylinder engine, Automatic Gas Fired Screed Heating And Temperature Control System, Automatic Auger Feed Controls, Plus Road And Working Lights, All Weather Canopy, Plus New Operators And New Spare Parts Manuals, Shotblasted, Repainted; Completely Rewired and Reconditioned And With All New Tyres, Seats Etc., And Looking As New.

 PRICE: £47500 Ex Works

TRACKED PAVER FINISHERS

1 No. Blaw Knox BK450, Year 1995, Fitted With Hydraulically Extending Screed From 2.5 Metres To 4.9 Metres, Cummins 6 cylinder engine, Automatic Auger Feed Controls, ATIC Automatic Gas Fired Screed Heating And Temperature Control, Reversing Bleeper, Rotorlights, Blaw Kontrol Automatic Grade And Slope Controls, All Weather Canopy, Plus New Operators And New Spare Parts Manuals, Completely Reconditioned And Ready To Work.

                                                                                                PRICE: £85000 ex works

NB This Machine can be Equipped with a Heavyweight Bolt On Screed with all Extensions and Fittings to take the Machine from 2.5 metres to 8 metres Laying Width instead of Hydraulically Extending Screed with no increase in price!

SMALL PAVER FINISHERS

1 No. New Hanta F1430WE Wheeled Paver, Four Wheel Drive, Equipped With Hydraulic Extending Screed From 1.4 Metres To 3.0 Metres, Paving Thickness: 10 – 200mm, Weight: 5.9 Tons, Full Hydrostatic Drive, Paving Speed: 1 – 10 M/Min, Travel Speed: 1 – 9.5km/H, Turning Radius: 4.5 Metres, Hopper Capacity: 5 Tons Kubota V2203-EU11 Engine, Plus New Operators And New Spare Parts Manuals, Also Grade Controls And Canopies Are Available For This Machine At Extra Cost.

1 No. Blaw Knox BK16 Tracked Paver, Year 1983, Fitted With Hydraulically Extending Strike Off Screed, Extending From 1.372 Metres To 2.438 Metres, Complete With Extension Boxes To Take The Laying Width To 3.2 Metres, Hatz Twin Cylinder Diesel Engine, Weight 3.5 Tonnes, (Plate Conveyor Type), Cleaned And Serviced With New Operators And New Spare Parts Manuals.

PRICE: £9000 ex works

1 No. Bitelli BB30 Wheeled Paver, Year 1990, Equipped With Hydraulically Extending Screed From 1.6 Metres To 3.2 Metres, Deutz 3 Cylinder Air Cooled Engine, Automatic Screed Heating And Control System, Shotblasted, Repainted, Completely Rewired And Reconditioned And Ready For Work. Complete With New Operators And New Spare Parts Manuals.

                                                                                                    PRICE: £37500 ex works

1 No. Barber Greene SB111, Fitted With Hydraulically Extending Strike Off Screed Plates From 2.5 Metres To 4 Metres. Ford 4 Cylinder Engine, Gas Screed Heating System, Complete With New Operators And New Spare Parts Manuals, The Paver Has Been Repaired, Serviced, Shotblasted And Repainted And Is Ready To Work.

PRICE: £25000 ex works

ANCILLARY EQUIPMENT

1 No. Phoenix Mk 2Chipspreader, Fitted With Ford Diesel Engine And To Be Fully Repaired, Completely Re-Wired With New Batteries And All Fittings, Fully Serviced Shotblasted And Resprayed With All New Decals, Stripes, Instruction Plates, Roadlights, Working Lights, Rotor Light, Safety Guards Etc. Ford 3 cylinder engine As The Example Photograph Shows.  

1 No. Asphalt Tar Sprayer Mounted On Mercedes Chassis, Complete With Air Operated Spray Bar Etc., Capacity 6350 Litres, Mounted On Mercedes Chassis, This Is An Ex Council Machine In Excellent Condition, (As Shown In Accompanying Photographs) And Will Be Fully Cleaned, Serviced And Ready For Work.

1 No. Shields And Whittaker Mastic Cookers, 1 ¾ - 2 Tons Capacity Fitted With Tow Bar, Overrun Brakes And Lister Diesel Engine. We Have Just Fitted New Asphalt Boiler Plus New Insulation And Boiler Plate Liners. This Machine Has Been Shotblasted, Resprayed And Is Ready For Work.

2 No. Shields And Whittaker Mastic Cooker, 3 Tons Capacity, Both Fitted With Tow Bar, Air Brakes And Electric Start Lister/Petter Diesel Engines. Ready To Work.

 PRICE: £4500 ex works each

1 No. Phoenix Unistor Hotbox, Year 1995, 4 Cubic Metre Capacity, Hot Asphalt Storage Container On Demountable Chassis Ready For Fitting Onto Vehicle. Fitted With Electric Start Diesel LPA2 Lister/Petter 2 Cylinder Engine.

2 No. Bomag Bw141 Ad Rollers, Years 2000, Both Fitted With Hydraulic Joint Cutters, Fully Glazed Cabs, Roadlights, Working Lights, Rotor Lights And Ready For Work.

PRICE: £22000 ex works

6 No. Benford MBR71L Pedestrian Controlled Rollers, with Hand Start Lister/Petter Engines and Hydraulic Power Take Off Point for Hand Held Breaker Hammer, Complete with Trailer for Transporting Same from site to site

                                         PRICE: £1600 ex works each

Or Shotblasted and Painted As Shown In Photograph.

                                         PRICE: £1800 ex works each

OPTIONAL EXTRA   Hydraulic Road Breaker Hammers and Piping to Connect to the Rollers are Available for a further £400 each.

1 No. JCB 2CX Airmaster, Year 1996, Four Wheel Drive, Fitted with Fully Glazed Cab, Side Tipping Front Loader Bucket and Rear Mounted Compressor.

Also Fitted with Road and Working Lights and Rotorlights. Ready to Work.

 PRICE: £8500 ex works

1 No. International Tractair Loader / Compressor, Fully Serviced, Shotblasted And Resprayed With All New Cab Glass, Also Fitted With Road And Working Lights, Rotorlights And In Very Good Working Order.

  PRICE: £4500 ex works

1 No. Kubota KX36HG Mini Excavator, Year 1996, Fitted With Rubber Tracks And Piped Up For Hydraulic Breaker, Complete With 3 No. Buckets, In Excellent Condition. Included Is The Trailer For Same, (All As Shown In Picture), Fully Serviced And Ex Our Own Works Fleet With Under 2000 Genuine Hours Worked!

1 No. Case 1845C Skidsteer Loader And Planer And Brushes, Year 1997, Fitted With 4 In 1 Loading Bucket, Large Sweeper Brush And Bucket, Plus Heavy Duty Road Planer Attachment Etc.

1 No. Bobcat 643, Complete with Forklift Forks, Loading Bucket And Hydraulically Driven Sweeper Brush with another discharge bucket, Deutz Twin Cylinder Air Cooled Engine, Tyres 90% Good, Ready for Work.

PRICE: £4500 ex works

1 No. Set of Twin Thermoplastic Lining Mixer/Boilers, with Lister LT1 Diesel Engine Powering the Hydraulic Stirring Systems. Both Cauldrons are Reinsulated and Reclad. Manual Ignition System, Reconditioned, Shotblasted and Resprayed and in Excellent Working Order.

1 No. Puma FD15, Forklift, Fitted with Izusu Diesel Engine with all Tyres Nearly New and Lifting Capacity of 1½ Tonnes in Excellent Working Condition, (Ex College Machine).

1 No Mahle Compressor, MIK 3.0A, 10 Bar, 22 KW Motor, 

Ex National Health Service.

PRICE: £1000 each ex works

1 No. Power Curber Mobile Asphalt Kerb Extrusion Machine, to be Fitted with New Engine, Complete With Size Formers.

In Excellent Order.

PRICE: £4800 ex works

Or in “AS IS” Condition. PRICE: £2000 ex works

1 No. Atlas Copco XAS45  91cfm Compressor, Year 1996, Only 1100 Hours, Fitted with Road/Trailer Lights, Excellent Condition.  Ready to work.

 PRICE: £2500 ex works

DO YOU NEED SPARE PARTS FOR YOUR BLAW KNOX PAVER?

WE HAVE THE LARGEST STOCK OF GENUINE PAVER PARTS AVAILABLE TODAY

OUR HUGE STOCK OF SPARES INCLUDES MANY HARD-TO-OBTAIN ITEMS FOR THE OLDER PAVERS
AS WELL AS CURRENT MODELS! JUST LET US KNOW YOUR REQUIREMENTS AND
WE GUARANTEE YOU OUR BEST EFFORTS WITH NO OBLIGATION

PHONE OR FAX OR E-MAIL FOR A COMPETITIVE PRICE AND SPEEDY DELIVERY!

FOR FURTHER INFORMATION:

PHONE: + 44 20 8556 1128                                                   FAX: + 44 20 8558 9191

EMAIL: craigplant@hotmail.com

SALES: STUART CRAIG 

                            SPARE PARTS: SARAH SPEARS                                    

                                                                            REPAIRS AND SERVICE: MICHAEL SPOKES

 VISIT US ON OUR NEW WEBSITE:     www.craigplant.com

#--------------------------------------------------------------------------------------------------------------------------------------

MAILING LIST UPDATE PLEASE GIVE THIS YOUR ATTENTION

If you would like us to circulate future details of Our Stock to you, please fill in and

send this form to Sarah Spears.

COMPANY  NAME +.......................................................................................................

ADDRESS +..............................................................................................................................................................

TELEPHONE NUMBER (.............................................................................................................

FAX NUMBER ( ...................................................          EMAIL -............................................................................

CONTACT NAME:......................................................................................................

PLEASE CROSS APPROPRIATE BOXES FOR FURTHER INFORMATION:

·       SALES/STOCK LIST                            □

·       PARTS/SPARES                                    □

·       AFTER SALES CARE/SERVICE          □

·       PARTICULAR MACHINES                 □

    (PLEASE STATE)

ASPHALT PAVER AND CONSTRUCTION MACHINERY

SALES AND SPARE PARTS WORLDWIDE